How much does a Trex deck cost in North Georgia?

Most installed Trex decks run $18k to $55k+: a 16×20 in Enhance® starts around $18k, Select® and Transcend® land $22k to $30k, and multi-level or Lineage™ projects range higher. Resurfacing a sound existing frame in Trex runs $12k to $20k. The free calculator gives you a personalized range in under a minute.

Is composite decking worth the extra cost?

Run the 10 year math. Wood costs less to build but demands restaining every 2 to 3 years plus ongoing board fixes, while composite needs soap and water. By year 10 total costs nearly converge, and by 15 composite typically wins outright while still looking new. If you plan to stay in your home, it’s the stronger buy.

Does composite decking get hot in the Georgia sun?

Darker boards in full sun do get warm, composite and wood alike. We plan for it honestly: lighter colorways for exposed decks, Transcend® Lineage™ with heat-mitigating technology for the sunniest sites, and shade structures where the design allows. Tell us your sun exposure and we’ll steer the color choice.

Trex or TimberTech: which do you install?

Both, and we’ll recommend by project rather than by habit. Our Platinum certification is with Trex, and TimberTech brings its own strengths in certain colors and profiles. You’ll see samples of each, and the honest tradeoffs, before you decide.

How long does Trex decking last?

Trex warranties its boards for 25 to 50 years depending on line, covering fade, staining and material defects. Realistically a well-installed composite deck outlives the warranty paper. The structure underneath matters just as much, which is why our composite-spec framing gets the same attention as the boards.

Can you install Trex on my existing deck frame?

Often, yes. The frame must pass structural inspection and meet composite spacing requirements, which usually means adding joists or blocking. When it qualifies, resurfacing saves thousands over rebuilding. That service lives under deck remodeling, and the free assessment tells you if your frame makes the cut.

Home

›

Deck Services

›

Composite Decking

Trex® · TimberTech® · Zero Staining

Trex® Composite Decking Installation in North Georgia

The last deck material you'll ever buy, installed by one of the few TrexPro® Platinum crews in Georgia. That's the top 1% of Trex installers nationwide, and it's the difference between composite that lasts 25 years and composite that disappoints in 5.

TrexPro® Platinum

TimberTech® Installer

Certified at the Highest Tier

Composite Decking Installers Certified by Trex® Itself

Composite boards are only half the product. The other half is the install: framing spec’d for composite spans, hidden fasteners set correctly, gapping tuned for Georgia’s temperature swings, and breathability details that keep the warranty valid. North Georgia Elite Decks holds TrexPro® Platinum status, a tier Trex reserves for roughly the top 1% of its contractors nationwide, earned through factory training, install volume and audited customer satisfaction.

We install Trex® and TimberTech® across Canton, Woodstock, Alpharetta, Cumming, Jasper and Ellijay, and we put our certification behind every board.

TREXPRO
PLATINUM

What Platinum status means for your project

Factory-trained crews, direct manufacturer support, and installs that qualify for Trex’s strongest warranty coverage. See what it takes to earn Platinum →

Why Composite Wins

Why Homeowners Switch to Composite Decking

One decision up front trades a lifetime of maintenance for a lifetime of weekends.

Red-brown composite deck with picture-frame border and pressure-treated cable railing facing dense green woods

Never Stain Again

No sanding, sealing or restaining cycles. Soap-and-water washing is the entire maintenance plan.

Golden-brown TimberTech Legacy composite deck with picture-frame border and black aluminum railing facing dense summer woods

25 to 50 Year Warranties

Fade, stain and structural coverage in writing, registered by us at completion.

Brown composite deck with pressure-treated baluster railing opening onto layered blue mountain ridges in early autumn

Barefoot-Friendly Boards

No splinters, no popped nails, no annual roughness. Capped boards stay smooth for decades.

Two-level tan composite deck with black aluminum railing and matching composite top rail beside a gray-sided home

Color That Stays

Deep wood tones engineered against Georgia sun, warrantied against fading and food stains alike.

Gray-brown composite deck with picture-frame border boards and pressure-treated wire mesh railing beside a wooded fence line

95% Recycled Materials

Trex boards are made almost entirely of reclaimed wood and recycled film. The greenest deck is one you never re-treat with chemicals.

Wide brown composite stair run with white posts and black balusters beside a deck enclosed by fresh lattice skirting

Hidden Fasteners, Clean Lines

No screw heads across your deck surface. Grooved boards clip in from the side for a furniture-grade finish.

Good, Better, Best

Which Trex® Line Fits Your Project?

Three tiers, one honest conversation. We bring samples of each so you can feel the difference before you pay for it.

Entry

Trex Enhance®

Capped composite protection at the friendliest price. Great color range, lighter board profile.

Best for: budget-smart family decks

Mid & Premium

Trex Select® & Transcend®

Deeper grain, richer streaked colors, stronger fade performance. The sweet spot most of our clients choose.

Best for: forever-home decks

Flagship

Transcend® Lineage™

Trex's coolest-underfoot, most premium boards with heat-mitigating technology and signature colorways.

Best for: full sun & showpiece builds

Your Starting Point

Three Ways to Go Composite

Where you start depends on the deck you have today. All three roads end at zero staining.

01

Build New in Composite

No deck yet, or dreaming bigger? Design a brand-new Trex deck from the footings up.

Custom Deck Building →

02

Resurface a Sound Frame

Healthy structure, tired wood boards? Swap the surface to composite and keep the frame.

Deck Remodeling →

03

Rebuild in Composite

Old deck past saving? Tear out and rebuild with a composite-spec frame from day one.

Deck Replacement →

The Honest Spreadsheet

Wood vs Composite: The 10 Year Cost Truth

Wood wins the day you pay for it. Composite wins every year after. Here's a typical 16×20 deck over a decade.

Pressure-Treated Wood

Build cost$11k – $16k

Restain every 2–3 yrs (×4)$3.2k – $7.2k

Board & fastener fixes$1k – $3k

10 year total$15k – $26k

Trex® Composite

Build cost$18k – $28k

Annual soap & water washDIY or $300/yr

Warrantied surface repairs$0

10 year total$18k – $31k

By year 10 the gap nearly closes, and composite keeps its looks the whole way while wood needs its fifth refinish. Stretch to year 15 and composite usually wins outright.

How It Works

Our Composite Deck Installation Process

Five steps, engineered for the material from the frame up.

1

Design & Line Selection

Layout, colors and Trex line chosen with real samples on site, plus an itemized quote.

2

Composite-Spec Framing

Joist spacing tightened to composite requirements, joist tape applied, and the structure squared for perfectly straight lines.

3

Hidden-Fastener Installation

Boards clipped with concealed fasteners, gapped for thermal movement, borders and breaker boards mitered clean.

4

Railings & Finishing

Trex railing systems, aluminum, or cable installed to match, with trim and skirting detailed.

5

Warranty Registration & Walkthrough

We register your Trex warranty, hand over the paperwork, and walk the finished deck together.

(404) 662-2273

Call or text us anytime

FREE DESIGN + SAMPLES

Get Your Trex® Deck Quote

Tell us about your project. A live member of our team will contact you to ask a few questions about your project and schedule your free on-site consultation.

No spam · No pressure · 1-day reply

TrexPro® Platinum, top installer

Warranty registered for you

Samples brought to your home

Platinum Work

Trex® Decks We've Built Across North Georgia

Composite done at certification level: straight lines, hidden fasteners, and colors chosen to last.

See the Full Gallery →

The Platinum Difference

What Top 1% Installation Actually Looks Like

01

Factory-Trained Crews

Trex trains and audits our installers directly. Your deck is built to the spec sheet, not to habit.

02

Composite-Spec Framing

Tighter joist spacing, joist tape, and thermal gapping. The details that stop sagging and squeaking years from now.

03

Warranty You'll Never Chase

We register your coverage at completion and hand you the documents. If a claim ever comes up, we handle it.

04

Steered Honestly

If wood genuinely fits your budget and plans better, we'll say so. Platinum status is worthless without trust.

Straight Answers on Price

What Does a Trex® Deck Cost in North Georgia?

Most composite decks land between $18,000 and $55,000+ installed, driven by size, Trex line and railing choice. Resurfacing an existing sound frame in Trex runs meaningfully less. Every quote is itemized to the board.

Try the Cost Calculator →Explore Financing

16×20 in Trex Enhance®

$18k – $24k

16×20 in Select® / Transcend®

$22k – $30k

Multi-level or Lineage™ builds

$30k – $55k+

Resurface existing frame in Trex

$12k – $20k

Typical 2026 installed ranges incl. materials, labor & hidden fasteners. Financing available on all composite builds.

Verified Google Reviews

Homeowners Who Went Composite With Us

★★★★★

NGE did an outstanding job redecking our original decks with Trex and also expanding the decks on 2 levels, adding an additional 940 sq ft. They are professional in all aspects of the job and the crew does excellent work.

Verified Google Review

Trex re-deck · 940 sq ft expansion

★★★★★

They added a 3rd deck, replaced existing wood posts with steel supports and installed Trex decking. In spite of the difficulty of working on a steep hillside, they did not take any shortcuts and the quality was excellent.

Verified Google Review

Trex decking · steep hillside lot

★★★★★

On both occasions David's crew was absolutely outstanding. I cannot recommend them highly enough. Will use them again soon when I need to replace some other decking with Trex.

Verified Google Review

Repeat client · Trex side deck

Composite Questions

Trex® & Composite Decking Questions, Answered

How much does a Trex deck cost in North Georgia?
Most installed Trex decks run $18k to $55k+: a 16×20 in Enhance® starts around $18k, Select® and Transcend® land $22k to $30k, and multi-level or Lineage™ projects range higher. Resurfacing a sound existing frame in Trex runs $12k to $20k. The free calculator gives you a personalized range in under a minute.
Is composite decking worth the extra cost?
Run the 10 year math. Wood costs less to build but demands restaining every 2 to 3 years plus ongoing board fixes, while composite needs soap and water. By year 10 total costs nearly converge, and by 15 composite typically wins outright while still looking new. If you plan to stay in your home, it’s the stronger buy.
Does composite decking get hot in the Georgia sun?
Darker boards in full sun do get warm, composite and wood alike. We plan for it honestly: lighter colorways for exposed decks, Transcend® Lineage™ with heat-mitigating technology for the sunniest sites, and shade structures where the design allows. Tell us your sun exposure and we’ll steer the color choice.
Trex or TimberTech: which do you install?
Both, and we’ll recommend by project rather than by habit. Our Platinum certification is with Trex, and TimberTech brings its own strengths in certain colors and profiles. You’ll see samples of each, and the honest tradeoffs, before you decide.
How long does Trex decking last?
Trex warranties its boards for 25 to 50 years depending on line, covering fade, staining and material defects. Realistically a well-installed composite deck outlives the warranty paper. The structure underneath matters just as much, which is why our composite-spec framing gets the same attention as the boards.
Can you install Trex on my existing deck frame?
Often, yes. The frame must pass structural inspection and meet composite spacing requirements, which usually means adding joists or blocking. When it qualifies, resurfacing saves thousands over rebuilding. That service lives under deck remodeling, and the free assessment tells you if your frame makes the cut.

Build It Once

Stain It Never. Build It Once, in Trex®.

Free design consultation with real board samples at your home, from a TrexPro® Platinum crew, anywhere in North Georgia.

Get My Free Design + Samples →Call (404) 662-2273